100% new and super brightness LED light
Output power: 5W
Lamp type: Philips LED
Material: ABS + Aluminum alloy
2 PCS Door Logo Projector Lights
Install the special door logo lights：
1.Use a flat-head screwdriver to remove and disconnect the original door step lights;
2.Plug in new door lights with correspondent connector;
3.Done! LOGO should be projected on the ground.
Install the general purpose door lights：
1.First test if the received projection lamp can work normally.
2.Remove the car door panel.
3.Find the correct position and drill with a punch.
4.Install the logo projector light. Tighten the screw to fix the logo projector light, and then connect the positive and negative terminals to the wires that controls the door switch.
5.Check if it is installed correctly. Does the lamp work properly? Whether the projected logo direction is what you want.
6.Install the car door panel back to its original position. All is perfect!
For Infiniti FX37
For Infiniti FX50
For Infiniti G37
For Infiniti G25
For Infiniti Q50
For Infiniti M25
For Infiniti M35
For Infiniti M37
For Infiniti EX25
For Infiniti QX50
For Infiniti QX56
For Infiniti QX70
For Infiniti QX80
For Infiniti JX35
For Infiniti QX60
For Infiniti QX30